Industrial Part PS-C33 of Phcc Pro Series - Request a Quote
For industrial products like PS-C33 Sump/Battery Backup System, 9 Amps Backup from manufacturers such as Phcc Pro Series, you won’t find a better source than Industrials Unlimited, an all-inclusive marketplace for industrial products and much more. As a leader among independent distributors, we have access to an inventory of more than 2 billion new and obsolete parts such as PS-C33 and many others. We are also an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited business, ensuring the quality of each part we sell.
Whether you need PS-C33 from product category Pumps or any other parts in our vast and diverse inventory, Industrials Unlimited can provide it with short lead times and competitive prices. Any parts not in stock can be efficiently sourced and shipped via our extensive international supply chain network that spans North America and Europe. We are also the only independent distributor with a no China sourcing policy, meaning every part we sell is fully traceable or comes directly from a trusted manufacturer like Phcc Pro Series. To begin the purchasing process immediately, submit an RFQ today. Our team of dedicated account managers is standing by and will respond to you in 15 minutes or less.
| 12VDC Battery Charger | 13 Amps |
| Agency Compliance | UL |
| Alarm Application | Indoor |
| Alarm Included | Yes |
| Amps | 4.0 A |
| Amps - Back-Up | 16.00 |
| Amps - Pumps | 4.00 |
| Base Material | Non-corrosive Polypro. Strainer (Primary) ABS (Secondary) |
| Body Material | Cast Iron, Stainless Steel (Primary); ABS (Secondary) |
| Cord Length | 10 ft |
| Cord Length - Pumps | 10 ft. (Primary), 7 ft. (Secondary) |
| Discharge Dia. | 1 1/2 in |
| Discharge Gender | Female |
| Discharge NPT | 1-1/2 F |
| Discharge Standard | NPT |
| Duty | Continuous (Primary); Intermittent (Secondary) |
| Duty Cycle | Continuous; Intermittent |
| Flow Rate @ 10 Ft. of Head | 50.0 gpm (Primary); 40.0 gpm (Secondary) |
| Flow Rate @ 15 Ft. of Head | 42.0 gpm (Primary); 10.0 gpm (Secondary) |
| Flow Rate @ 5 Ft. of Head | 59.0 gpm (Primary); 51.7 gpm (Secondary) |
| For Use With | Mfr. No. B-2200 |
| GPH of Water @ 0 Ft. of Head | 3900 (Primary), 4000 (Secondary) |
| GPH of Water @ 10 Ft. of Head | 3000 (Primary); 2400 (Secondary) |
| GPH of Water @ 15 Ft. of Head | 2520 (Primary) 600 (Secondary) |
| GPH of Water @ 5 Ft. of Head | 3540 (Primary), 3100 (Secondary) |
| GPM of Water @ 5 Ft. of Head | 59 (Primary), 51.67 (Secondary) |
| Height | 22-1/4 |
| Housing Material | Cast Iron Stainless Steel (Primary); ABS (Secondary) |
| HP | 1/3 (Primary); 1/3 (Secondary) |
| Impeller Material | Polycarbonate (Primary) |
| Impeller Material - Pumps | Polycarbonate |
| Includes | 2 Pumps, Monitoring Controller, Battery Fill Bottle, Battery Box |
| Item | Sump/Battery Back-Up System |
| Item - Sump Pumps | Sump/Battery Back-Up System |
| Length | 11 |
| Max. Dia. Solids | 7/8 |
| Max. Dia. Solids (In.) - Back-Up | 1/8 |
| Max. Diameter Solids | 7/8 |
| Max. Flow (GPH) | 3900 |
| Max. Flow (GPH) - Back-Up | 4000 |
| Max. Flow (GPH) - Pumps | 3900 |
| Max. Head | 30.0 ft |
| Max. Head (Ft.) - Back-Up | 17 |
| Max. Head - Pumps | 30 ft. |
| Max. Liquid Temp. | 104 Degrees F |
| Min. Sump Pit Dia. | 11 in |
| Motor Type | PSC (Primary); Brush type DC (Secondary) |
| Off Point | 10 sec After the Float Drops Which Normally Empties the Pit (Primary); 30 sec (Secondary) |
| Off Point (In.) | 10 seconds after the float drops which normally empties the pit (Primary) 30 Seconds (Secondary) |
| On Point | 9 1/2 in |
| On Point (In.) | 9 1/2 (Primary); 11 1/2 (Secondary) |
| Primary Pump Body Material | Cast Iron, Stainless Steel |
| Primary Pump Duty Cycle | Continuous |
| Primary Pump Flow Rate @ 20 Ft. of Head | 30.0 gpm |
| Primary Pump Flow Rate @ 5 Ft. of Head | 59.0 gpm |
| Primary Pump Impeller Material | Polycarbonate |
| Primary Pump Maximum Head | 30 ft |
| Primary Pump Maximum Solids Diameter | 7/8 in |
| Primary Pump Overall Height | 22 1/4 in |
| Primary Pump Rated Voltage | 115V AC |
| Primary Pump Width at Widest Point | 10 in |
| Pump Body Material | Cast Iron, Stainless Steel (Primary), ABS (Secondary) |
| Pump HP | 1/3 |
| Secondary Pump Body Material | ABS |
| Secondary Pump Duty Cycle | Intermittent |
| Secondary Pump Flow Rate @ 10 Ft. of Head | 40.0 gpm |
| Secondary Pump Flow Rate @ 15 Ft. of Head | 10.0 gpm |
| Secondary Pump Maximum Head | 17 ft |
| Secondary Pump Maximum Solids Diameter | 1/8 in |
| Secondary Pump Rated Voltage | 12V DC |
| Secondary Pump Shaft Seal Material | Rulon |
| Shaft Seal | Dual Carbon Ceramic (Primary); Rulon (Secondary) |
| Shaft Seal Material - Pumps | Carbon, Ceramic |
| Switch Actuation | Dual Micro Reed |
| Switch Electrical Connection | Piggyback |
| Switch Type | Caged Automatic Dual Float |
| Switch Type - Pumps | Caged Automatic Dual Float |
| Voltage | 115 |
| Voltage - Back-Up | 12VDC |
| Voltage - Pumps | 120VAC |
| Width | 10 |
| Width at Widest Point | 10 in |
| PS 1621 |
|
Guaranteed On - Time Delivery |
|
Customized & User-Friendly Database |
|
Over 5100 Manufacturers |
|
Competitive Prices |
|
Scheduling Flexibility |
|
Complete Purchasing Solutions |
If you have more than one item,upload your spreadsheet here.
| Popular Industrial Brands |
|---|
| Sun Joe |
| Muddy |
| Suncast |
| Speedaire |
| Thermos |
| Aims Power |
| Stack On |
| Mrcool |
| Presto Lifts |
| Comfort Zone |
Semiconductor's Certifications and Memberships
We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
Request for Quote